23.2.7.1.4. USBX device msc

23.2.7.1.4.1. Overview

The example implements a msc device.

23.2.7.1.4.2. Board Setting

• Connect a USB port on PC to the PWR DEBUG port on the development board with a USB Type-C cable

• Connect a USB port on PC to one of USB port on the development board with a USB Type-C cable

23.2.7.1.4.3. Running the example

There should be a disk on computer. The disk capacity should be 26 KB, and files can be copy to or from the disk. When the example runs successfully, following message is displayed in the terminal:

USBX device mass storage example
USB MSD device activate