23.2.7.1.3. USBX device hid mouse

23.2.7.1.3.1. Overview

The example implements a hid mouse device.

23.2.7.1.3.2. Board Setting

• Connect a USB port on PC to the PWR DEBUG port on the development board with a USB Type-C cable

• Connect a USB port on PC to one of USB port on the development board with a USB Type-C cable

23.2.7.1.3.3. Running the example

When the example runs successfully, the mouse will move in a rectangle, following message is displayed in the terminal:

USBX device HID Mouse example

ux_device_stack_initialize
HID device activate

USB device is CONFIGURED
ux_device_class_hid_event_set success
ux_device_class_hid_event_set success
ux_device_class_hid_event_set success
ux_device_class_hid_event_set success
ux_device_class_hid_event_set success