17. GPIOM

17.1. Overview

The GPIOM example shows how to use GPIOM to configure pin control module, and use the specific control module to change outpin level.

17.2. Board Setting

No special settings are required.

17.3. Running the example

When the example runs successfully, the LED will flash 5 times, and the following message is displayed in the terminal:

gpio example
using gpiom configures pin control module
toggling led 5 times in total
toggling led 1/5 times
toggling led 2/5 times
toggling led 3/5 times
toggling led 4/5 times
toggling led 5/5 times