31.2.6.1. Netx Duo Dhcp

31.2.6.1.1. Overview

The netx duo dhcp example shows netx dhcp functions.

31.2.6.1.2. Board Setting

Connect an Ethernet port on PC to a RGMII port or a RMII port on the development board with an Ethernet cable

31.2.6.1.3. Project Configuration

Ethernet Port Settings: Refer to Ethernet common project settings

31.2.6.1.4. Running the example

When the example runs successfully, it will print phy link status periodically until its status becomes Up, and it will print DHCP progress. Following message is displayed in the terminal:

NetXDuo is running␍␍␊
DHCP In Progress...␍␍␊
Enet phy init passed !␍␊
Link Status: Down␍␊
Link Status: Up␍␊
Link Speed:  100Mbps␍␊
Link Duplex: Full duplex␍␊
IP address: 192.168.50.76␍␍␊
Mask: 255.255.255.0␍␍