31.2.8.2.4. USBX device msc

31.2.8.2.4.1. Overview

The example implements a msc device.

31.2.8.2.4.2. Board Setting

• Connect a USB port on PC to the PWR DEBUG port on the development board with a USB Type-C cable

• Connect a USB port on PC to one of USB port on the development board with a USB Type-C cable

31.2.8.2.4.3. Running the example

There should be a disk on computer. You can be copy files to or from the disk. When the example runs successfully, following message is displayed in the terminal:

USBX device mass storage example
USB MSD device activate