.. _tsn_lwip_iperf: lwip_iperf ======================== 概述 ------ 本示例通过iperf (https://iperf.fr/iperf-download.php) 测试TCP/UDP吞吐性能，共有如下四种模式： - MCU用作TCP服务端 / PC用作TCP客户端 - MCU用作TCP客户端 / PC用作TCP服务端 - MCU用作UDP服务端 / PC用作UDP客户端 - MCU用作UDP客户端 / PC用作UDP服务端 硬件设置 ------------ * 使用USB Type-C线缆连接PC USB端口和PWR DEBUG端口 * 使用以太网线缆连接PC以太网端口和开发板以太网端口 工程配置 ------------ - 以太网端口配置：参考 : `以太网通用工程设置 <../doc/Ethernet_Common_Project_Settings_zh>`_ - 以太网DHCP配置 - lwIP sample: 在`CMakeLists.txt`中，支持如下配置: - sdk_compile_definitions(-DLWIP_DHCP=0): 禁用DHCP功能 - sdk_compile_definitions(-DLWIP_DHCP=1): 启用DHCP功能 - sdk_compile_definitions(-DENABLE_TSW_RECEIVE_INTERRUPT=0): 禁用TSW CPU端口接收中断 - sdk_compile_definitions(-DENABLE_TSW_RECEIVE_INTERRUPT=1): 启用TSW CPU端口接收中断 运行示例 ------------ * 编译下载程序 * 串口终端显示如下信息： .. code-block:: console This is a TSW demo: Iperf (Polling Usage) LwIP Version: 2.1.2 TSW phy init passed ! Link Status: Down Link Status: Up Link Speed: 1000Mbps Link Duplex: Full duplex IPv4 Address: 192.168.100.10 IPv4 Netmask: 255.255.255.0 IPv4 Gateway: 192.168.100.1 1: TCP Server Mode 2: TCP Client Mode 3: UDP Server Mode 4: UDP Client Mode Please enter one of modes above (e.g. 1 or 2 ...): * 选择测试模式并运行iperf - TCP服务端模式 - 在串口终端按空格键，并等待提示 .. code-block:: console 1: TCP Server Mode 2: TCP Client Mode 3: UDP Server Mode 4: UDP Client Mode Please enter one of modes above (e.g. 1 or 2 ...): - 在串口终端输入测试模式的代号 .. code-block:: console Please enter one of modes above (e.g. 1 or 2 ...): 1 - 在命令行中运行iperf .. code-block:: console iperf -c 192.168.100.10 -i 1 - 观察结果 .. code-block:: console ------------------------------------------------------------ Client connecting to 192.168.100.10, TCP port 5001 TCP window size: 64.0 KByte (default) ------------------------------------------------------------ [360] local 192.168.100.5 port 64459 connected with 192.168.100.10 port 5001 [ ID] Interval Transfer Bandwidth [360] 0.0- 1.0 sec 42.6 MBytes 357 Mbits/sec [360] 1.0- 2.0 sec 42.5 MBytes 357 Mbits/sec [360] 2.0- 3.0 sec 42.6 MBytes 358 Mbits/sec [360] 3.0- 4.0 sec 42.5 MBytes 356 Mbits/sec [360] 4.0- 5.0 sec 42.6 MBytes 357 Mbits/sec [360] 5.0- 6.0 sec 42.6 MBytes 358 Mbits/sec [360] 6.0- 7.0 sec 42.6 MBytes 357 Mbits/sec [360] 7.0- 8.0 sec 42.6 MBytes 357 Mbits/sec [360] 8.0- 9.0 sec 42.5 MBytes 357 Mbits/sec [360] 9.0-10.0 sec 42.5 MBytes 357 Mbits/sec [360] 0.0-10.0 sec 426 MBytes 357 Mbits/sec - TCP客户端模式 - 在串口终端按空格键，并等待提示 .. code-block:: console 1: TCP Server Mode 2: TCP Client Mode 3: UDP Server Mode 4: UDP Client Mode Please enter one of modes above (e.g. 1 or 2 ...): - 在命令行中运行iperf .. code-block:: console iperf -s -i 1 - 在串口终端输入测试模式的代号 .. code-block:: console Please enter one of modes above (e.g. 1 or 2 ...): 2 - 观察结果 .. code-block:: console ------------------------------------------------------------ Server listening on TCP port 5001 TCP window size: 64.0 KByte (default) ------------------------------------------------------------ [412] local 192.168.100.5 port 5001 connected with 192.168.100.10 port 49153 [ ID] Interval Transfer Bandwidth [412] 0.0- 1.0 sec 18.1 MBytes 152 Mbits/sec [412] 1.0- 2.0 sec 19.1 MBytes 160 Mbits/sec [412] 2.0- 3.0 sec 19.1 MBytes 160 Mbits/sec [412] 3.0- 4.0 sec 19.1 MBytes 160 Mbits/sec [412] 4.0- 5.0 sec 19.1 MBytes 160 Mbits/sec [412] 5.0- 6.0 sec 19.1 MBytes 160 Mbits/sec [412] 6.0- 7.0 sec 19.1 MBytes 160 Mbits/sec [412] 7.0- 8.0 sec 19.1 MBytes 160 Mbits/sec [412] 8.0- 9.0 sec 19.1 MBytes 160 Mbits/sec [412] 9.0-10.0 sec 19.0 MBytes 160 Mbits/sec [412] 0.0-10.0 sec 190 MBytes 159 Mbits/sec - UDP服务端模式 - 在串口终端按空格键，并等待提示 .. code-block:: console 1: TCP Server Mode 2: TCP Client Mode 3: UDP Server Mode 4: UDP Client Mode Please enter one of modes above (e.g. 1 or 2 ...): - 在串口终端输入测试模式的代号 .. code-block:: console Please enter one of modes above (e.g. 1 or 2 ...): 3 - 在命令行中运行iperf .. code-block:: console iperf -u -c 192.168.100.10 -i 1 -b 1000M **注：如果选择的是RGMII网口，最大带宽能设置为1000M** - 观察结果 .. code-block:: console ------------------------------------------------------------ Client connecting to 192.168.100.10, UDP port 5001 Sending 1470 byte datagrams UDP buffer size: 64.0 KByte (default) ------------------------------------------------------------ [360] local 192.168.100.5 port 49290 connected with 192.168.100.10 port 5001 [ ID] Interval Transfer Bandwidth [360] 0.0- 1.0 sec 55.4 MBytes 465 Mbits/sec [360] 1.0- 2.0 sec 68.7 MBytes 576 Mbits/sec [360] 2.0- 3.0 sec 73.5 MBytes 617 Mbits/sec [360] 3.0- 4.0 sec 78.3 MBytes 657 Mbits/sec [360] 4.0- 5.0 sec 80.1 MBytes 672 Mbits/sec [360] 5.0- 6.0 sec 81.7 MBytes 685 Mbits/sec [360] 6.0- 7.0 sec 82.6 MBytes 693 Mbits/sec [360] 7.0- 80 sec 84.2 MBytes 706 Mbits/sec [360] 8.0- 9.0 sec 84.4 MBytes 708 Mbits/sec [360] 9.0-10.0 sec 79.6 MBytes 667 Mbits/sec [360] 0.0-10.0 sec 768 MBytes 645 Mbits/sec [360] Server Report: [360] 0.0- 9.8 sec 303 MBytes 259 Mbits/sec 0.179 ms 154530/216247 (71%) [360] 0.0- 9.8 sec 88679 datagrams received out-of-order [360] Sent 548137 datagrams - UDP客户端模式 - 在串口终端按空格键，并等待提示 .. code-block:: console 1: TCP Server Mode 2: TCP Client Mode 3: UDP Server Mode 4: UDP Client Mode Please enter one of modes above (e.g. 1 or 2 ...): - 在命令行中运行iperf .. code-block:: console iperf -u -s -i 1 - 在串口终端输入测试模式的代号 .. code-block:: console Please enter one of modes above (e.g. 1 or 2 ...): 4 - 观察结果 .. code-block:: console ------------------------------------------------------------ Server listening on UDP port 5001 Receiving 1470 byte datagrams UDP buffer size: 64.0 KByte (default) ------------------------------------------------------------ [344] local 192.168.100.5 port 5001 connected with 192.168.100.10 port 49153 [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [344] 0.0- 1.0 sec 20.7 MBytes 174 Mbits/sec 0.047 ms 2668/17445 (15%) [344] 1.0- 2.0 sec 20.6 MBytes 173 Mbits/sec 0.069 ms 0/14727 (0%) [344] 2.0- 3.0 sec 20.7 MBytes 173 Mbits/sec 0.139 ms 0/14739 (0%) [344] 3.0- 4.0 sec 20.7 MBytes 173 Mbits/sec 0.284 ms 0/14746 (0%) [344] 4.0- 5.0 sec 20.7 MBytes 173 Mbits/sec 0.044 ms 0/14739 (0%) [344] 5.0- 6.0 sec 20.7 MBytes 173 Mbits/sec 0.054 ms 0/14736 (0%) [344] 6.0- 7.0 sec 20.7 MBytes 173 Mbits/sec 0.080 ms 0/14743 (0%) [344] 7.0- 8.0 sec 20.7 MBytes 173 Mbits/sec 0.122 ms 0/14751 (0%) [344] 8.0- 9.0 sec 20.6 MBytes 173 Mbits/sec 0.046 ms 0/14721 (0%) [344] 0.0- 9.8 sec 203 MBytes 173 Mbits/sec 0.414 ms 2668/147330 (1.8%) - 异常退出 按空格键退出测试，然后重新选择测试模式