#include "hpm_usb_drv.h"
#include "hpm_misc.h"
#include "hpm_soc_feature.h"
#include "hpm_common.h"

Enumerations
enum	{ ENDPTCTRL_STALL = HPM_BITSMASK(1, 0) , ENDPTCTRL_TYPE = HPM_BITSMASK(3, 2) , ENDPTCTRL_TOGGLE_INHIBIT = HPM_BITSMASK(1, 5) , ENDPTCTRL_TOGGLE_RESET = HPM_BITSMASK(1, 6) , ENDPTCTRL_ENABLE = HPM_BITSMASK(1, 7) }

Functions
void	usb_phy_deinit (USB_Type *ptr)
	De-Initialize USB phy. More...

void	usb_phy_init (USB_Type *ptr, bool host)
	Initialize USB phy. More...

void	usb_dcd_bus_reset (USB_Type *ptr, uint16_t ep0_max_packet_size)
	USB device bus reset. More...

void	usb_dcd_init (USB_Type *ptr)
	Initialize controller to device mode. More...

void	usb_dcd_deinit (USB_Type *ptr)
	Deinitialize controller to device. More...

void	usb_dcd_connect (USB_Type *ptr)
	Connect by enabling internal pull-up resistor on D+/D-. More...

void	usb_dcd_disconnect (USB_Type *ptr)
	Disconnect by disabling internal pull-up resistor on D+/D-. More...

void	usb_dcd_edpt_open (USB_Type ptr, usb_endpoint_config_t config)
	Open an endpoint. More...

uint8_t	usb_dcd_edpt_get_type (USB_Type *ptr, uint8_t ep_addr)
	get a specified endpoint type More...

void	usb_dcd_edpt_xfer (USB_Type *ptr, uint8_t ep_idx)
	Submit a transfer. More...

void	usb_dcd_edpt_stall (USB_Type *ptr, uint8_t ep_addr)
	Stall endpoint. More...

void	usb_dcd_edpt_clear_stall (USB_Type *ptr, uint8_t ep_addr)
	Clear stall. More...

bool	usb_dcd_edpt_check_stall (USB_Type *ptr, uint8_t ep_addr)
	Clear stall. More...

void	usb_dcd_edpt_close (USB_Type *ptr, uint8_t ep_addr)
	Close a specified endpoint. More...

void	usb_dcd_remote_wakeup (USB_Type *ptr)
	Wakeup from host. More...

bool	usb_hcd_init (USB_Type *ptr, uint32_t int_mask, uint16_t framelist_size)
	Initialize controller to host mode. More...

void	usb_hcd_port_reset (USB_Type *ptr)
	Initialize controller to host modeHost Reset port. More...

Enumeration Type Documentation

◆ anonymous enum

anonymous enum