#include <hpm_qeo_regs.h>
| struct { ... } QEO_Type::ABZ |
◆ AMPLITUDE
| __RW uint32_t QEO_Type::AMPLITUDE[3] |
◆ DEADZONE_SHIFT
| __RW uint32_t QEO_Type::DEADZONE_SHIFT[3] |
◆ DEBUG0
| __R uint32_t QEO_Type::DEBUG0 |
◆ DEBUG1
| __R uint32_t QEO_Type::DEBUG1 |
◆ DEBUG2
| __R uint32_t QEO_Type::DEBUG2 |
◆ DEBUG3
| __R uint32_t QEO_Type::DEBUG3 |
| struct { ... } QEO_Type::LIMIT[3] |
◆ LINE_WIDTH
| __RW uint32_t QEO_Type::LINE_WIDTH |
◆ MAX
| __RW uint32_t QEO_Type::MAX |
◆ MID_POINT
| __RW uint32_t QEO_Type::MID_POINT[3] |
◆ MIN
| __RW uint32_t QEO_Type::MIN |
◆ MODE
| __RW uint32_t QEO_Type::MODE |
◆ PHASE_SHIFT
| __RW uint32_t QEO_Type::PHASE_SHIFT[4] |
◆ PHASE_TABLE
| __RW uint32_t QEO_Type::PHASE_TABLE[24] |
◆ POSTION_SEL
| __RW uint32_t QEO_Type::POSTION_SEL |
◆ POSTION_SOFTWARE
| __RW uint32_t QEO_Type::POSTION_SOFTWARE |
◆ POSTION_SYNC
| __W uint32_t QEO_Type::POSTION_SYNC |
| struct { ... } QEO_Type::PWM |
◆ RESOLUTION
| __RW uint32_t QEO_Type::RESOLUTION |
◆ STATUS
| __R uint32_t QEO_Type::STATUS |
◆ VD_VQ_INJECT
| __RW uint32_t QEO_Type::VD_VQ_INJECT[3] |
◆ VD_VQ_LOAD
| __W uint32_t QEO_Type::VD_VQ_LOAD |
| struct { ... } QEO_Type::WAVE |
◆ WDOG_WIDTH
| __RW uint32_t QEO_Type::WDOG_WIDTH |
The documentation for this struct was generated from the following file:
- /home/docs/checkouts/readthedocs.org/user_builds/hpm-sdk/checkouts/latest/soc/HPM5300/ip/hpm_qeo_regs.h