hpm_rtl8211.c File Reference

#include "hpm_tsw_drv.h"
#include "hpm_rtl8211_regs.h"
#include "hpm_rtl8211.h"

Functions
static bool	rtl8211_check_id (TSW_Type *ptr, uint8_t port)
void	rtl8211_reset (TSW_Type *ptr, uint8_t port)
	Reset RTL8211 PHY chip. More...
void	rtl8211_basic_mode_default_config (TSW_Type *ptr, rtl8211_config_t *config)
	Set default configuration for RTL8211 PHY basic mode. More...
bool	rtl8211_basic_mode_init (TSW_Type *ptr, uint8_t port, rtl8211_config_t *config)
	Initialize RTL8211 PHY chip in basic mode. More...
void	rtl8211_get_phy_status (TSW_Type *ptr, uint8_t port, tsw_phy_status_t *status)
	Get RTL8211 PHY status. More...

Function Documentation

rtl8211_basic_mode_default_config()

void rtl8211_basic_mode_default_config	(	TSW_Type *	ptr,
		rtl8211_config_t *	config
	)

Set default configuration for RTL8211 PHY basic mode.

Parameters

[in]	ptr	Pointer to the TSW peripheral base address
[out]	config	Pointer to the configuration structure to be initialized

This function initializes the configuration structure with default values:

• Loopback: disabled
• Auto-negotiation: enabled (unless __DISABLE_AUTO_NEGO is defined)
• Speed: 100 Mbps (when auto-negotiation is disabled)
• Duplex: full duplex (when auto-negotiation is disabled)

rtl8211_basic_mode_init()

bool rtl8211_basic_mode_init	(	TSW_Type *	ptr,
		uint8_t	port,
		rtl8211_config_t *	config
	)

Initialize RTL8211 PHY chip in basic mode.

Parameters

[in]	ptr	Pointer to the TSW peripheral base address
[in]	port	Port number
[in]	config	Pointer to the PHY configuration structure

Return values

true	Initialization completed successfully
false	Initialization failed (PHY ID check failed)

This function performs the following operations:

• Verifies the PHY ID to ensure it's a RTL8211 chip
• Configures the PHY according to the provided configuration
• Sets up loopback mode, auto-negotiation, speed, and duplex settings

rtl8211_check_id()

static bool rtl8211_check_id ( TSW_Type *  ptr, uint8_t  port  )

static

rtl8211_get_phy_status()

void rtl8211_get_phy_status	(	TSW_Type *	ptr,
		uint8_t	port,
		tsw_phy_status_t *	status
	)

Get RTL8211 PHY status.

Parameters

[in]	ptr	Pointer to the TSW peripheral base address
[in]	port	Port number
[out]	status	Pointer to the status structure to store PHY status

This function reads the PHY status register and extracts:

• Link status (up/down)
• Port speed (10 Mbps, 100 Mbps, or 1000 Mbps)
• Duplex mode (half or full)

rtl8211_reset()

void rtl8211_reset	(	TSW_Type *	ptr,
		uint8_t	port
	)

Reset RTL8211 PHY chip.

Parameters

[in]	ptr	Pointer to the TSW peripheral base address
[in]	port	Port number