5.44. RNDIS Host - DHCP Client
5.44.1. Overview
This sample demonstrates USB RNDIS/ECM Host implementation with DHCP for automatic IP assignment. Supports Luat 4G modules (air780e), EC20 modules, and ML307R modules.
5.44.2. Board Setting
Development board connected to air780e/EC20/ML307R via USB0 port using USB cable
Debug port or console port of RNDIS/ECM Host connected to PC
5.44.3. Example of output log
When programming the development board and connecting air780e, the board will display the following logs on the serial console (if not, check if the module is powered on):
Start cherryusb host usbnet task...
************************************************
DHCP example
************************************************
[I/USB] EHCI HCIVERSION:0100
[I/USB] EHCI HCSPARAMS:010011
[I/USB] EHCI HCCPARAMS:0006
[I/USB] New high-speed device on Hub 1, Port 1 connected
[I/USB] New device found,idVendor:19d1,idProduct:0001,bcdDevice:0200
[I/USB] The device has 8 interfaces
[I/USB] Enumeration success, start loading class driver
[I/USB] Loading rndis class driver
[I/USB] Ep=01 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] Ep=82 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] rndis init success
[I/USB] rndis query OID_GEN_SUPPORTED_LIST success,oid num :22
[W/USB] Ignore rndis query iod:00010101
[W/USB] Ignore rndis query iod:00010102
[W/USB] Ignore rndis query iod:00010103
[W/USB] Ignore rndis query iod:00010104
[I/USB] rndis query iod:00010106 success
[I/USB] rndis query iod:00010107 success
[W/USB] Ignore rndis query iod:0001010a
[W/USB] Ignore rndis query iod:0001010b
[W/USB] Ignore rndis query iod:0001010c
[W/USB] Ignore rndis query iod:0001010d
[W/USB] Ignore rndis query iod:00010116
[W/USB] Ignore rndis query iod:0001010e
[W/USB] Ignore rndis query iod:00010111
[W/USB] Ignore rndis query iod:00010112
[W/USB] Ignore rndis query iod:00010113
[I/USB] rndis query iod:00010114 success
[W/USB] Ignore rndis query iod:00010115
[I/USB] rndis query iod:01010101 success
[I/USB] rndis query iod:01010102 success
[W/USB] Ignore rndis query iod:01010103
[I/USB] rndis query iod:01010104 success
[W/USB] Ignore rndis query iod:01010105
[I/USB] rndis set OID_GEN_CURRENT_PACKET_FILTER success
[I/USB] rndis set OID_802_3_MULTICAST_LIST success
[I/USB] rndis MAC address 20:89:84:6a:96:ab
[I/USB] Register RNDIS Class:/dev/rndis
[I/US[E/USB]B] Create rn do not supdis rx threaport Class:d
0x0a,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0x02,Subclass:0x02,Protocl:0x01
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0x02,Subclass:0x02,Protocl:0x01
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0x02,Subclass:0x02,Protocl:0x01
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
IPv4 Address : 192.168.10.2
IPv4 Subnet mask : 255.255.255.0
IPv4 Gateway : 192.168.10.1
When connecting EC20 module, the following output indicates successful initialization and IP assignment:
[I/USB] New high-speed device on Hub 1, Port 1 connected
[I/USB] New device found,idVendor:2c7c,idProduct:0125,bcdDevice:0318
[I/USB] The device has 6 interfaces
[I/USB] Enumeration success, start loading class driver
[E/USB] do not support Class:0xff,Subclass:0xff,Protocl:0xff
[E/USB] do not support Class:0xff,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0xff,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0xff,Subclass:0x00,Protocl:0x00
[I/USB] Loading cdc_ecm class driver
[I/USB] CDC ECM mac address 9e: 28: 59: e0: 00: 00
[I/USB] CDC ECM Max Segment Size:1280
[I/USB] Ep=89 Attr=03 Mps=16 Interval=09 Mult=00
[I/USB] Ep=88 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] Ep=05 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] Select cdc ecm altsetting: 1
[I/USB] Set CDC ECM packet filter:000c
[I/USB] Register CDC ECM Class:/dev/cdc_ether
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
IPv4 Address : 192.168.225.27
IPv4 Subnet mask : 255.255.255.0
IPv4 Gateway : 192.168.225.1