30. MIPI_CSI

30.1. Overview

The example project demonstrates capturing video data from a camera using the MIPI_CSI interface. The captured video data is received by CAM and displayed on the screen through the buffer.

30.2. Hardware Setup

  1. Connect the camera and screen to the video expansion board.

  2. Connect the video expansion board to the development board.

30.3. Project Configuration

Modify board/xxx/CMakeLists.txt to select the corresponding panel type (LVDS or MIPI).

30.4. Notes

  • Camera support: OV5640

  • Panel support: MIPI or LVDS interface

30.5. Running Phenomenon

Once the project runs correctly, the screen will display the video data from the camera. The serial terminal will output the following information:

mipi_csi example
I2C bus is ready
name: cc10128007, lcdc_clk: 74250khz
mipi csi clk freq: 13813953 Hz