3.42. RNDIS Host - PING
3.42.1. Overview
the sample shows the USB RNDIS Host is connected to luat 4G module (air780e module) or ec20 module to network and ping communication
3.42.2. Board Setting
development board interconnected to air780e or ec20 module throught port USB0.
development board(RNDIS Host) DEBUG port or console port connect to PC.
3.42.3. Example of output log
download the programs to the development board, and connect air780e, the board will show logs as follows
if not, check whether the upper module is powered on
Start rndis host ping task...
[I/USB] EHCI HCIVERSION:0100
[I/USB] EHCI HCSPARAMS:010011
[I/USB] EHCI HCCPARAMS:0006
[I/USB] New high-speed device on Hub 1, Port 1 connected
[I/USB] New device found,idVendor:19d1,idProduct:0001,bcdDevice:0200
[I/USB] The device has 8 interfaces
[I/USB] Enumeration success, start loading class driver
[I/USB] Loading rndis class driver
[I/USB] Ep=01 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] Ep=82 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] rndis init success
[I/USB] rndis query OID_GEN_SUPPORTED_LIST success,oid num :22
[W/USB] Ignore rndis query iod:00010101
[W/USB] Ignore rndis query iod:00010102
[W/USB] Ignore rndis query iod:00010103
[W/USB] Ignore rndis query iod:00010104
[I/USB] rndis query iod:00010106 success
[I/USB] rndis query iod:00010107 success
[W/USB] Ignore rndis query iod:0001010a
[W/USB] Ignore rndis query iod:0001010b
[W/USB] Ignore rndis query iod:0001010c
[W/USB] Ignore rndis query iod:0001010d
[W/USB] Ignore rndis query iod:00010116
[W/USB] Ignore rndis query iod:0001010e
[W/USB] Ignore rndis query iod:00010111
[W/USB] Ignore rndis query iod:00010112
[W/USB] Ignore rndis query iod:00010113
[I/USB] rndis query iod:00010114 success
[W/USB] Ignore rndis query iod:00010115
[I/USB] rndis query iod:01010101 success
[I/USB] rndis query iod:01010102 success
[W/USB] Ignore rndis query iod:01010103
[I/USB] rndis query iod:01010104 success
[W/USB] Ignore rndis query iod:01010105
[I/USB] rndis set OID_GEN_CURRENT_PACKET_FILTER success
[I/USB] rndis set OID_802_3_MULTICAST_LIST success
[I/USB] Register RNDIS Class:/dev/rndis
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0x02,Subclass:0x02,Protocl:0x01
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0x02,Subclass:0x02,Protocl:0x01
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0x02,Subclass:0x02,Protocl:0x01
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
*********************************************************************************
input ping the IP or URL address and press the enter key to end
if want to terminate midway, please press the esc key
*********************************************************************************
IPv4 Address : 192.168.10.2
IPv4 Subnet mask : 255.255.255.0
IPv4 Gateway : 192.168.10.1
when the EC20 module is connected, the following information is printed, indicating that the EC20 initialization is successful and the IP is assigned.
[I/USB] EHCI HCIVERSION:0100
[I/USB] EHCI HCSPARAMS:010011
[I/USB] EHCI HCCPARAMS:0006
[I/USB] New high-speed device on Hub 1, Port 1 connected
[I/USB] New device found,idVendor:2c7c,idProduct:0125,bcdDevice:0318
[I/USB] The device has 6 interfaces
[I/USB] Enumeration success, start loading class driver
[E/USB] do not support Class:0xff,Subclass:0xff,Protocl:0xff
[E/USB] do not support Class:0xff,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0xff,Subclass:0x00,Protocl:0x00
[E/USB] do not support Class:0xff,Subclass:0x00,Protocl:0x00
[I/USB] Loading cdc_ecm class driver
[I/USB] CDC ECM mac address 9e: 28: 59: e0: 00: 00
[I/USB] CDC ECM Max Segment Size:1280
[I/USB] Ep=89 Attr=03 Mps=16 Interval=09 Mult=00
[I/USB] Ep=88 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] Ep=05 Attr=02 Mps=512 Interval=00 Mult=00
[I/USB] Select cdc ecm altsetting: 1
[I/USB] Set CDC ECM packet filter:000c
[I/USB] Register CDC ECM Class:/dev/cdc_ether
[E/USB] do not support Class:0x0a,Subclass:0x00,Protocl:0x00
*********************************************************************************
input ping the IP or URL address and press the enter key to end
if want to terminate midway, please press the esc key
*********************************************************************************
IPv4 Address : 192.168.225.27
IPv4 Subnet mask : 255.255.255.0
IPv4 Gateway : 192.168.225.1
after that, need to enter the IP addrees or domain name to be ping, and press enter key when done
for example: www.baidu.com
Pinging www.baidu.com [120.232.145.144] ..................
from 120.232.145.144 bytes=60 icmp_seq=0 ttl=52 time=53 ms
from 120.232.145.144 bytes=60 icmp_seq=1 ttl=52 time=77 ms
from 120.232.145.144 bytes=60 icmp_seq=2 ttl=52 time=91 ms
from 120.232.145.144 bytes=60 icmp_seq=3 ttl=52 time=104 ms
from 120.232.145.144 bytes=60 icmp_seq=4 ttl=52 time=82 ms