25.1. linv2_master
25.1.1. Overview
The linv2_master sample project shows that LINV2 sends/receives data at master mode.
25.1.2. Board Setting
Requires a USB_LIN debugger Please refer to Pin Description for specific board. connect LIN signal on board to USB_LIN debugger.
25.1.3. Running the example
Configure usb_lin debugger:
Configure com and baudrate, then click
Set to Debuggeroption
Set ID, data and checksum mode, tick
enable option， then clickConfigure to Debuggeroption：
Running the example, check the result in debugger window
When the example runs successfully, the log would be seen on the terminal like:
LIN master example
LIN master sent wakeup signal
ID: 31, sent 8 bytes:
0 1 2 3 4 5 6 7
ID: 30, receive 8 bytes
7 6 5 4 3 2 1 0