41.6. tsn_ptp_freertos_master

41.6.1. Overview

This example shows a functionality of TSN PTP Master

• Master communicates with slave via the gPTP protocol.

41.6.2. Board Settings

• Connect a USB port on PC to the PWR DEBUG port on the development board with a USB Type-C cable

• Connect an TSN RGMII port on a development board with an TSN RGMII port on another development board

41.6.3. Project Configurations

• None

41.6.4. Run Example

• Compiling and Downloading

• Running log is shown in the serial terminal as follows:

  This is a TSW demo: PTP Master
  TSW phy init passed !
  starting task 'syn eth0' ... done
  PTP4TSYNC | add domain 0
  PTP4TSYNC | set ptp traffic priority=0 (Background) for domain 0
  PTP4TSYNC | add eth0 to domain 0
  Link Status: Down
  Link Status: Up
  Link Speed:  1000Mbps
  Link Duplex: Full duplex
  domain   0: domaintime=1726133403.019751880 or Thu Sep 12 09:30:03 2024
  domain   0: domaintime=1726133406.025912960 or Thu Sep 12 09:30:06 2024
  domain   0: domaintime=1726133409.031911990 or Thu Sep 12 09:30:09 2024