41.7. tsn_ptp_freertos_slave

41.7.1. Overview

This example shows a functionality of TSN PTP slave

• Master communicates with slave via the gPTP protocol.

41.7.2. Board Settings

• Connect a USB port on PC to the PWR DEBUG port on the development board with a USB Type-C cable

• Connect a TSN RGMII port on a development board with a TSN RGMII port on another development board

41.7.3. Project Configurations

• None

41.7.4. Run Example

• Compiling and Downloading

• Running log is shown in the serial terminal as follows:

  This is a TSW demo: PTP Slave
  TSW phy init passed !
  starting task 'syn eth0' ... done
  PTP4TSYNC | add domain 0
  PTP4TSYNC | set ptp traffic priority=0 (Background) for domain 0
  PTP4TSYNC | add eth0 to domain 0
  Link Status: Down
  Link Status: Up
  Link Speed:  1000Mbps
  Link Duplex: Full duplex
  domain   0: domaintime=1725874203.019739580 or Mon Sep 09 09:30:03 2024
  PTP4TSYNC | assign sync source to domain 0
  domain   0: domaintime=1726133607.430393244 or Thu Sep 12 09:33:27 2024
  domain   0: domaintime=1726133610.436395863 or Thu Sep 12 09:33:30 2024